does trim need to be removed to install carpet

Do baseboards have to be removed to install carpet? No, baseboards do not need to be removed. … The carpet installer can run the tack strip up to the trim, then roll excess carpet under the trim. For most installers, this is not a problem and can be done easily.

Can you install carpet after TRIM? You can actually install carpet and trim in either order. So, if you’ve already done one or the other, no worries. However, if you have the option, you really want to do the trim first. Otherwise you’re going to have to be really careful of the carpet when you’re painting or staining the baseboards.

Should I install trim before or after carpet? Baseboards are often installed before flooring, since they must be finished in place with either stain or paint and this is much easier without worrying about staining the hardwood, tile or carpet. Cut the baseboard to the correct lengths using a handheld cutting tool.

Does installing carpet damage baseboards?

Your average carpet installer is capable of replacing the baseboards, but there is always the risk of damage when trying to remove it. This is why most contractors try to avoid it at all costs.

How far should baseboard be off the floor for carpet?

The best height for baseboard when carpet is going to be installed is 3/8″. Why? Raised base makes it easier for the carpet installer to install ANY thickness of carpet and the edges look better.

Should there be a gap between baseboard and floor?

If you plan on installing carpet, your baseboards should be about 1 inch off the floor. This will give you enough room for the padding and the carpeting. If you are leaving the floors uncarpeted, you should not have any gaps. At most, the gap should be around the width of a quarter to prevent heavy drafts.

How do you hide the gap between baseboard and floor?

If the gap between your baseboard and tile floor is ¼-inch or smaller, it should be filled with caulk. If the gap is larger than this, it’s best to install shoe molding to hide the gap. When caulking gaps between your floor and tile, it’s essential to use a paintable caulk.

How much gap should be between floor and trim?

The Standard If you are just replacing the baseboards without flooring in place, then most contractors will ask you to give them between ⅜ and ½ inch of room between the subfloor and the baseboards. This will allow them the room they need to tuck your flooring underneath the baseboards.

How high should trim be for carpet?

The term trim includes door casings, baseboards, and any molding that will come in contact with the floor. They should be kept 3/8″ to 1″ above the floor if installed before the carpet is laid or according to the manufacturer’s instructions.

Does door trim go all the way to the floor?

In order to get a nice appearance, do not leave any gap between the side casing and the floor. If the casing doesn’t touch the floor, it is very hard to conceal this gap. It is important to leave the same space around the door jamb on all sides, otherwise you won’t be able to make the corner joints properly.

What goes first floor or trim?

Baseboards are often installed before flooring, although it depends on the type of flooring being used. It is necessary for carpeting to have the trim in place, allowing the edges to be tucked under and out of sight. However, for hardwood or laminate, it is easier to install the trim after.

Do you trim or floor first?

The answer to the question is, “do the floors first!” Here’s why: Removing and replacing flooring or carpeting is dirty work. If you paint first, and then do floors, there is a good chance that a lot of dirt, dust, sawdust or tile/stone dust will end up on your freshly painted walls and trim.

Do you remove trim before installing laminate?

Remove the baseboards the day before the flooring installation so you can move furniture away from the walls. Number the walls and corresponding sections of baseboards to easily match them up later. Use a utility knife to slice any caulk that secured the baseboard to the wall.

Should I remove baseboards before install vinyl plank flooring?

Don’t want to deal with removing baseboards? You can leave them in place, but you will need to leave a ¼” gap between the baseboard and flooring, to account for expansion over time. … For a better look, however, our experts recommend removing the baseboards prior to laying down new flooring.

Do flooring companies replace baseboards?

Many flooring companies install baseboards as well as flooring. Since flooring companies often have the same tools necessary for removing baseboards safely without damaging them as they do for putting down the flooring itself, they are usually a better bet for removing and replacing baseboards than the homeowners.

Do you have to remove baseboards before installing hardwood floors?

A: It is not absolutely necessary to remove baseboards to install new hardwoods, but remember that wood floors require an expansion gap of 1/2 inch along the surrounding walls to accommodate expansion and contraction with changes in moisture and humidity.